Ideal Installing 220 Volt Breaker

If you have 2 220 outlets and each one is 20 amps.

Installing 220 volt breaker. So here s the deal on installing more than one per circuit. In this video i show ya ll how to install a 220 volt outlet in your garage. The red wire goes under the other screw.

The black hot wire connects to one of the breakers in the two breaker set and the red wire connects to the other one. For a written tutorial check out my blog at https goo gl vqkwiepatreon. It does not matter which screw receives which wire.

Use an outlet box that s large enough to house the 220 outlet you plan on installing. It s easy to identify these bus bars because they already have a number of white or bare wires connected to them. A big misconception is that you can only install one 220 volt device outlet per circuit breaker.

Now just the wire alone is going to cost you. It s all math by the way oh yeah and lots more money. Find a spot on your wall that s next to a stud to place the outlet box and trace the outline of the box on the wall with a pencil.

Make a hole in the wall where you plan to install the 220 outlet that matches the size of the outlet box you re using. Insert the black wire under one screw. Loosen the two screws on the 220 volt breaker.

You ll need to use 8 wire for the whole circuit including a 40 amp breaker. Tighten the screws to hold the wires firmly to the breaker. Nema 6 20 outlet on amazon http amzn to 2gatxuy wire stripper tool on amazon https amzn to 32cu1ms multimeter on amazon https amzn to 33ldthr in.