Glory Nest Thermostat E Installation Instructions
Nest thermostats don t have a touch screen.
Nest thermostat e installation instructions. Use the touch bar on the right side to control your thermostat. From there use a pencil and mark where the two screws need to go one on the top and one on the bottom. Set up your thermostat 3.
Switch off power this protects you and avoids blowing a fuse in your equipment. Stand mounted thermostats should be placed on a table or shelf 0 75 1 m above the floor and no further than 1 m from the edge. Install the nest stand attach the thermostat base to the stand according to the instructions that came with it.
If you have an r rc or rh wire you can put it into the r connector on the nest thermostat. Page 3 in the box 1. During setup you can connect the thermostat to wi fi.
The nest thermostat is designed for diy installation but you can also hire a nest pro to do it for you. Get started using the nest. Your system wires to the nest thermostat.
3 8 in gently tug each wire to check they re secure and make sure. Use the built in leveler to make it level. Just turn the ring and press to select.
The nest thermostat will turn on and walk you through setup. They ll take care of installation and make sure everything s up and running. To get started using your nest thermostat you ll need to complete all the steps below.