Out Of This World Wiring A Ceiling Fan With Light With Two Switch

If you re wiring a ceiling fan with light with one switch though this additional wire won t be needed.

Wiring a ceiling fan with light with two switch. Based on countries and their wiring code there are two major classifications. Fan speed would need to be controlled by a pull chain or in some newer fans a wireless remote. The red wire is spliced to the output on the.

I explain how i wired a ceiling fan on one part of the switch and the light on the 3 way part of the switch. I also used a diagram picture thanks for watching. The hot wires are either black or red the white wires are neutral and the bare one is the ground wire.

Table of wiring code in different. At the switch box the black wire is splice to the output on the speed controller and at the other end to the black fan wire. Attach the neutral wires together and place the bare wire around some of the metal of the bracket in the ceiling.

The black cable wire is connected to the top terminal on the switch and spiced to the black and blue wires at the fan. Fan with 3 wires as seen from fan side with capacitor 4 wire fan with inbuilt led light. Simple fan with 2 wire.

Connect a black wire from the ceiling to the black wire from the fan. Wrap electric tape around the connection points and then attach wire. This wiring method is used when the power source is from the switch and one wants to control the fan and light from that single switch.

The neutral source wire is spliced to the white cable wire in the switch box and to the white fan wire at the other end. The source is at the switches and the input of each is spliced to the black source wire with a wire nut. This setup allows you to control the light and fan separately.